WARNING: This product contains nicotine. Nicotine is an addictive chemical.

Eleaf iKuu i200 kit w/ 4.5ml Melo 4 tank 200W 4600mAh

Out of stock
SKU
eleaf-iki200-kit

Upgrading from a vape pen to a box mod can be intimidating, but not with the Eleaf Ikuun/Ikuu i200 200W TC 4600mAh Starter Kit with Melo 4 Tank. This box mod starter kit gives you the safe, simple-to-use Eleaf Ikuun/Ikuu i200 200W TC 4600mAh Box Mod, the convenient Eleaf Melo 4 Tank, two coil heads, spare parts and a USB cable. You'll have everything you need to transition to box mod vaping.

Eleaf iKuu i200

Ergonomically Engineered

The Eleaf Ikuun/Ikuu i200 Box Mod features clean contours and gentle curves, allowing it to fit perfectly in your hand. An oversize lateral fire key is ideally positioned, so you can take quick hits without any fumbling. The box mod is 126 millimeters by 45 millimeters by 30 millimeters in size for easy carrying and storage.

Bold, Big Screen

Considered the big brother to the iKuun i80 kit, with its bright, large .96-inch screen, the Eleaf Ikuun/Ikuu i200 Box Mod is more powerful and just as simple to set and monitor. The interface is well organized, giving you the ability to check vital stats with a quick glance. A battery life indicator with a precise percentage reading lets you know when it's time to recharge. The maximum charging rate of 2A allows the battery to replenish quickly when you plug in your vape.

Plenty of Power

Equipped with a extremely large capacity 4500 mAh battery, the Eleaf Ikuun/Ikuu i200 Box Mod lets you vape on and on before you need to recharge. The powerful battery allows the box mod to provide a maximum power output of 200 watts in Variable Wattage Mode for large, thick clouds. If you're more concerned with flavor, use the Temperature Control Mode for vaping at precise heat levels between 200 and 600 degrees Fahrenheit. The vape supports nickel, titanium stainless steel and TCR M1, M2 and M3 coils.

Protections for Your Peace of Mind

The experts at Eleaf have taken the worries out of box mod vaping with the Eleaf Ikuun/Ikuu i200 Box Mod. While charging, the temperature of the vape is consistently controlled to ensure safety. Dual circuitry dramatically diminishes the risk of overcharging, over current conditions and over discharging. As Eleaf releases new firmware to enhance your vaping experience, you can update the vape with the included USB cable.

Quick Fill Capability

With its smart design, the Eleaf Melo 4 Tank keeps vaping simple. Slide the top cap away to reveal the leak-proof port, and you can add e-juice in seconds. The entire tank comes apart to allow for easy cleaning as needed. The tank is engineered to work with EC series coils that promote large clouds of flavorful vapor.

Upgrade to a box mod without worries about safety or complicated operation. Choose the Eleaf Ikuun/Ikuu i200 200W TC 4600mAh Starter Kit with Melo 4 Tank.

THE KIT INCLUDES

  • 1 x Eleaf Ikuun / Ikuu i200 200W TC BOX MOD
  • 1 x Eleaf Melo 4 Sub Ohm Tank
  • 1 x Eleaf EC2 0.3 Ω Ohm Single Cylinder Kanthal Atomizer Coil Head (Pre-Installed)
  • 1 x Eleaf EC2 0.5 Ω Ohm Single Cylinder Kanthal Atomizer Coil Head
  • 1 x Set of Spare O-Rings
  • 1 x Quick Charge Micro USB Cable
  • 2 x Users Manual
  • 1 x Warranty Card

SPECIFICATIONS

Eleaf Ikuun / Ikuu i200 200W TC Box Mod

  • 0.96” OLED Display Screen with Customizable Menu
  • Display: Vibrant Resolution
  • Centered 510 Thread connector with spring loaded pin and gold platted
  • Can Handle up to 25mm Tank without any Overhang
  • Weight: 198g (with MELO 4 Tank)
  • Size: 78.5 x 45 x 30mm (Mod Only), 126 x 45 x 30mm (with Tank)
  • Material: Durable Zinc Alloy Construction
  • Standby Current:
  • Maximum Output Current: 50A
  • Power Output Range: 1 - 200W (Watt) Maximum
  • Output Voltage: 0.5V – 9V
  • Output Modes: Variable Wattage (VW), Bypass, Temperature Control (TC)
  • Temperature Output Range: 200℉ - 600℉ (Fahrenheit) / 100℃ - 315℃ (Celsius)
  • Temperature Coefficient of Resistance (TCR) Adjustments
  • Adjustable Initial Resistance
  • Three Precision TCR Memory Modes
  • Preheat Capability
  • Stealth Function
  • Minimum Atomizer Resistance: 0.05Ω (Ohm)
  • Atomizer Output Resistance Range: 0.05Ω Ohm – 3.5Ω Ohm
  • Atomizer Resistance Range: Variable Temperature Mode 0.05Ω - 1.5Ω (0.5Ω is optimum performance for Titanium and Stainless Steel) (0.15Ω is optimum performance for Nickel Ni200)
  • Supports: Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
  • Charge Port: Micro USB (Charge and Firmware Upgrade), Charging LED Indicator
  • Charge Current: (5V / 2.0Amp) with Pass-through and Powerbank Capability
  • Batteries: 4600mAh Built-in Battery
  • Long Battery RUN-TIME
  • Intelligent Battery Monitoring with Battery Life Indicator
  • Ergonomic and Comfortable Oversized Firing Bar and Two Adjustment Buttons
  • Safety Features: Intelligent Atomizer Recognition, Over Temperature Protection, Over Current Protection, Short Circuit Protection, Low Resistance Protection, Reverse Polarity Protection, and Over / Under Voltage Protection, 12 Second Cut-off
  • Available Colors: Black, Green (Greenery), Silver, White, Grey, Blue, Red

Eleaf Melo 4 Sub Ohm Tank

  • Size: 52.5mm x 25mm
  • 25mm Base Diameter
  • Weight: 55g
  • Tank Capacity: 4.5 milliliters
  • Material: Stainless Steel, High Strength Pyrex Glass
  • Connection: 510 Thread
  • Airflow: Adjustable Dual Airflow at Base
  • Tank Fill: Retractable Top Fill System with Hinge Lock
  • Drip Tip: 510 Compatible Ultra Wide Drip Tip
  • Threaded Top Fill System
  • Coils: Compatible with the Original Eleaf EC Atomizer Heads
  • Eleaf MELO EC2 Atomizer Heads for Balanced Flavor and Vapor Production
  • Eleaf EC2 0.3 Ω Ohm Single Cylinder Kanthal Coil Head (Rated 30W – 80W)
  • Eleaf EC2 0.5 Ω Ohm Single Cylinder Kanthal Coil Head (Rated 30W – 100W)

For more info: iKuu i200 with MELO 4

We found other products you might like!

Disclaimers and Warnings

NOTE

All specifications, descriptions, product characteristics and claims are based on manufacturer information. It is important that you have good understanding and technical knowledge on how to use this product in order to ensure proper and safe operation.

REBUILDABLE ATOMIZERS

Rebuildable Atomizers are intended for ADVANCED USERS ONLY, who have the knowledge and experience in building coils and wicks, basic electronics knowledge, and can use a multimeter to test all built coils before use. Rebuildable Atomizer Coils and Wicks have known risks and must be carefully tested with a multimeter after building and before use, as faulty coils and wicks will blow electronic devices. If this product has a Rebuildable Atomizer and you are not comfortable using the needed tools, we suggest that you do not purchase this product and explore simpler options. Use Rebuildable Atomizer products at your own risk and please be safe.

BATTERY SAFETY WARINING & PRECAUTION:

ALL 18650 / 21700 / 20700 Li-ion (Lithium-ion) and LiPo (Lithium-ion Polymer) Rechargeable Batteries MUST be matching in brand, model, and specifications for use in any MOD BOX, KIT, CHARGER, and ANY DEVICE at ALL TIMES. Discharging and recharging of batteries should be done within the same grouping. Never use damaged or improperly wrapped batteries with any device. Failure to do so may result in injury.

Please make sure to have proper knowledge of using and handling rechargeable Li-ion (Lithium-ion) and LiPo (Lithium-ion Polymer) batteries before purchase or use. Use safety precautions when handling Li-ion cell batteries as they can be dangerous if used improperly. Due to their sensitive characteristics to charging, discharging, and risks of short circuiting, batteries may explode, burn, or cause a fire if mishandled.

Please follow these Lithium-ion Safety and Handling Tips listed below:

  • DO NOT make any modifications to the batteries in any way, shape, or form.
  • DO NOT overcharge Lithium-ion batteries. NEVER leave batteries unattended while they are charging or leave charging overnight and ALWAYS remember to charge them on a clean and fire-proof surface.
  • DO NOT use Lithium-ion batteries in any devices without built-in protection circuit board (PCB) that is capable of detecting shorts, over-discharge, over-charging and so forth, as it is deemed unsafe and increases risk of fire or explosion.
  • DO NOT discharge batteries below 2.5V. DO NOT charge the batteries over 4.2V.
  • ALWAYS use a plastic battery case or non-conductive container to store and transport your batteries when they are not in use. DO NOT place loose batteries in your pocket, purse, bag, or anywhere else or allow them to come into contact with any metal objects such as loose change, keys, or anything else metal, as this may cause the batteries to short circuit and possibility of burning and or exploding.
  • ALWAYS keep your batteries away from heat, sun, and hot surfaces to prevent any overheating.
  • ALWAYS inspect your batteries cells, chargers, or any other devices for any physical damage before use. If you detect any physical damage, including rips or tears in the battery cell wrapping, immediately discontinue use of these products and dispose of them properly.
  • ALWAYS dispose any battery cells, chargers and other electronic devices in accordance with local laws and mandates.

Ozone Smoke will not be held liable or responsible for any injury, damages, defects of permanent or temporary caused by use of Lithium-ion batteries, chargers, devices and other products. Use at your own risk.

RETURN POLICY AND WARRANTY

This product is covered by our 30-Day Limited Return Policy and Warranty against any manufacturer defects from the date of delivery. Accidental damage, scratches and / or discoloration from regular use are considered normal wear and tear and are not covered by our 30-Day Limited Return Policy and Warranty. After 30 days from delivery products cannot be returned for a refund or replacement by Ozone Smoke. Replacement or repair of products, therefore, is your exclusive remedy under the ORIGINAL manufacturer’s warranty policy. We highly recommend you keep the original packing or take picture of the code on the side of the box before discarding it, as the ORIGINAL manufacturer may need the serial number on the side of the box to provide a replacement or warranty service.

ALL RETURNS ARE SUBJECT TO A NON-REFUNDABLE SHIPPING CHARGE. CUSTOMER MUST PAY RETURN SHIPPING.

For complete details of Ozone Smoke Warranty and Return Policy click here.


Hassle-free Satisfaction. Guaranteed.

At Ozone Smoke™, we stand behind everything we do. If you're ever not satisfied with your purchase, let us know and we will do our best to make it right. That is our promise.
We strive to be your best and number one choice vape supplier for all your vaping needs from Kits, Mods, Vaporizer, Tanks, Coils, Batteries, Pod Systems, Premium Ejuices and Eliquids to all Vape Accessories. We're working hard to offer you the most of the latest products and top quality vape brands at the lowest price. If you ever find the same product for a lower price, let us know and we will beat it... Simple as that!.
Please be careful when comparing our prices to those of other retailers. Some online stores may have higher shipping costs, physical stores located outside of United States, knock offs, used, returned or opened packaging.
And finally, the most important, all of our products are guaranteed to be new, sealed and authentic!
(855) GO-OZONE (466-9663) Mon - Fri 9am - 5pm (EST)
2038 Cass Lake Rd , Keego Harbor, MI 48320
NOT FOR SALE TO MINORS | MUST BE 18+
TERMS AND CONDITIONS | PRIVACY AND COOKIE POLICY
Copyright © 2018 Ozone Smoke, Inc. All rights reserved.