Eleaf iStick Pico Kit with MELO 3 Mini
The iStick Pico, just like its name, is preferable, innovative, compact and outstanding (PICO). Powered by single interchangeable 18650 cell, it provides you with 75W maximum output and switchable VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR modes. With top e-liquid filling design, hidden airflow control and detachable structure, the new MELO III Mini is the best match for the iStick Pico.
ELEAF ISTICK PICO 75 W TC STARTER KIT
Despite the compact size, the iStick Pico allows an intelligent but yet satisfying draw with 75W maximum output and switchable VW/Bypass/TC(Ni,Ti,SS,TCR) modes.
Available in colors:
iStick Pico Mod
- Size: 45mm*23mm*70.5mm
- Thread type: 510 thread
- Cell type: High-rate 18650 cell (Continuous discharge current should be above 25A)
- Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
- Output wattage: 1-75W
- Resistance range: 0.05-1.5ohm (TC modes) 0.1-3.5ohm (VW/Bypass mode)
- Temperature range: 100－315℃/200－600℉ (TC modes)
- Color: full black, brushed silver, hot pink, black, grey silver, white, jet black bronze, white bronze dazzling, red crackle, brushed black silver brushed gunmetal, wood grain
Eleaf MELO III Mini
- Diameter: 22mm
- Length: 55mm
- Capacity: 2ml
- Thread type: 510 thread
- Material: 304 stainless steel
- Color: Silver, black
Tiny and Cute Appearance
With a compact size, you can hold the kit in the palm, much more convenient for usage and portability.
Interchangeable 18650 Cell
Users can carry spare cells when on the go and change the cell easily by removing the battery cap only.
All the parts of MELO III Mini can be detached, bringing more convenience in reassembling and cleaning.
MELO III Mini Top e-liquid Filling
The e-liquid can easily be refilled by removing the top cap
MELO III Mini Invisible Airflow Control
This new design of the invisible airflow control allows more flexibility and convenience in operation and is also plus to the fashionable appearance.
510 Spring Connector
It also retains stainless steel spring loaded 510 connector for strong wear resistance and high adaptability.
Unique Bottom Design
The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well.
Micro USB Port
Charging: The 18650 cell can be charged in the iStick Pico through the side USB port via 1A wall adapter or computer or charged with an external battery charger. The recommended way is to charge the cell externally as it will take less time to give the cell a full charge.
The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
For more info: Alient Kit - SMOK