Smok Mag Baby 50W Kit w/ TFV12 Baby Prince Tank
The starter kit gives you the compact SMOK Mag Baby 50W TC 1600 mAh Box Mod plus the SMOK TFV12 Baby Prince Tank, two coil heads, spare parts, replacement glass for the tank and a micro USB charging cable.
Smok Mag Baby Kit
Want to take vaping to the next level without moving to a large box mod? The SMOK Mag Baby 50W TC Starter Kit with TFV12 Baby Prince Tank is the perfect solution.
Take Aim at an Incredible Vape Experience
This is the mini version of the most popular mod of 2018, the full size SMOK MAG 225W. Inspired by gun magazines, the SMOK Mag Baby Box Mod fits perfectly in your hands and makes a sleek, clean statement. At 61.3 millimeters in height by 46 millimeters in width by 27 millimeters in depth, the box mod is smaller than other vapes on the market for easy storage and carrying.
The SMOK Mag Baby Box Mod is designed to keep you comfortable throughout your vape session. Vents are cut into the side of the box mod to allow excess heat to escape as you draw. As a result, the box mod remains cool to the touch and is less likely to overheat than similar vapes.
Massive Power in a Compact Size
With its built-in 1600 mAh battery, the SMOK Mag Baby Box Mod gives you plenty of power despite its small size. In Variable Wattage Mode, you can crank the power output up to 50 watts for massive cloud size. Temperature Control mode lets you vape at heat levels of 200 to 600 degrees Fahrenheit to enhance the flavor of your e-juice.
Bright, Easy-to-Read Screen
Equipped with a .96-inch OLED screen, the SMOK Mag Baby Box Mod is simple to set and monitor. The screen is extra bright and has an intuitive interface that allows you to get ready to vape in no time.
To protect you through every draw, the SMOK Mag Baby Box Mod has a number of protective features. The box mod alters performance based on the type of atomizer that you use and how you draw from the vape. With a 10-second cutoff, the box mod prevents over firing. The model also features protections against low voltage, overheating and short circuiting.
Upgradable Over Time
Connect the SMOK Mag Baby Box Mod to your computer with the included micro USB cable and you can update the firmware over time. This way, you can always benefit from the latest innovations from the experts at SMOK. The cable also allows you to easily recharge the battery.
Leakproof, Easy Filling
The SMOK TFV12 Baby Prince Tank is designed to keep vaping satisfying and simple. Its adjustable slots and Cobra drip tip maximize airflow and give you the ability to fine-tune your draw. Refilling the tank is easy through the leakproof slot, and the tank stays securely closed with the help of a patented locking mechanism.
See how mighty a compact box mod can be. Order the SMOK Mag Baby 50W TC Starter Kit with TFV12 Baby Prince Tank today.
THE KIT INCLUDES
- 1 x SMOK Mag Baby 50W TC BOX MOD
- 1 x SMOK TFV12 Baby Prince Sub Ohm Tank
- 1 x V8 Baby Q2 0.6 Ω Ohm Dual Coil Atomizer Head (Pre-Installed)
- 1 x V8 Baby M2 0.25 Ω Ohm Dual Coil Atomizer Head
- 1 x Replacement Glass
- 1 x USB Cable
- 1 x Spare Parts
- 1 x Users Manual
- 1 x Warranty Card
SMOK Mag Baby 50W TC Box Mod
- 0.96”OLED Display Screen with Customizable Color Menu
- Display: Vibrant Resolution, Shock Resistant, Shatter Resistant
- 510 Thread connector with spring loaded pin and gold platted
- Built-in 1600mAh Battery
- Weight: 144g
- Size: 61.3 x 46 x 27mm
- Material: Durable Zinc Alloy Construction with Carbon Fiber Inserts
- Standby Current: <400uA
- Power Output Range: 1 - 50W (Watt) Maximum
- Voltage Range: 0.5V – 9.0V (Direct Voltage Output System)
- Input Voltage: 6.4V – 9.0V
- Output Modes: 3 Settings (Soft, Normal, Hard)
- Charging Current: 600mA – 700mA
- Temperature Output Range: 200℉ - 600℉ (Fahrenheit) / 100℃ - 315℃ (Celsius)
- Temperature Coefficient of Resistance (TCR) Adjustments
- Adjustable Initial Resistance
- Precision Memory Modes
- Preheat Capability
- Minimum Atomizer Resistance: 0.05Ω (Ohm)
- Atomizer Output Resistance Range: 0.05Ω Ohm – 2Ω Ohm
- Supports: Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
- Charge Port: Micro USB (Charge and Firmware Upgrade), Charging LED Indicator
- Batteries: 1600mAh Battery (Built-in)
- Long Battery RUN-TIME
- Intelligent Battery Monitoring
- Ergonomic and Comfortable Squeeze Firing Bar (Trigger Like Design)
- Safety Features: Intelligent Atomizer Recognition, Over Temperature Protection, Over Current Protection, Short Circuit Protection, Low Resistance Protection, Reverse Polarity Protection, and Over / Under Voltage Protection, 10 Second Cut-off
- Available Colors: Red, Silver, Black/Red, Black/Prism, Gold, Green, Purple, Navy Blue, and Pink
SMOK TFV12 Baby Prince Sub Ohm Tank
- Size: 53.7mm x 26mm
- 23mm Base Diameter
- Weight: 55g
- Tank Capacity: 4.5 milliliters (Standard)
- Material: Stainless Steel, High Strength Glass (High Temperature Resistant and Explosion Proof)
- Connection: 510 Thread
- Airflow: Adjustable Dual Airflow at Base (15mm x 2mm Airslots)
- Tank Fill: Top Fill System with Hinge Lock
- Drip Tip: 810 Cobra Resin Ultra Wide Drip Tip (Different Color Cobra Drip Tips Sold Seperately)
- Swivel Action Top Fill
- The newly designed top cap has a patented locking mechanism, by simply pressing the side button you can open the filling cap. This design effectively avoids accidently opening the fill cap and prevents the juice from leaking.
- V8 Baby Q2 0.6 Ω Ohm Dual Coil Head (Patented Dual Coil)(20W - 50W Range / 30W - 40W Recommended Range)
- V8 Baby M2 0.25 Ω Ohm Dual Coil Head (Patented Dual Coil) For Cool and Smooth Taste (20W - 50W Range / 30W - 40W Recommended Range)
- Optional Coils:
- V8 Baby Q4 0.4 Ω Ohm Quadruple Coil Head (Patented Quadruple Coil)(30W - 65W Range / 50W - 60W Recommended Range)
- V8 Baby Mesh 0.15 Ω Ohm Dual Coil Head (Patented Dual Coil) For Fast Heating and Massive Vapor (40W - 80W Range / 60W - 70W Recommended Range)
- V8 Baby T12 0.15 Ω Ohm Decuple Coil Head (Patented Decuple Coil) For Massive Vapor (50W - 90W Range / 60W - 80W Recommended Range)
- V8 Baby T12 Red Light 0.15 Ω Ohm Decuple Coil Head (Patented Decuple Coil) For Massive Vapor and LED Shining Light (50W - 90W Range / 60W - 80W Recommended Range)
- V8 Baby T12 Green Light 0.15 Ω Ohm Decuple Coil Head (Patented Decuple Coil) For Massive Vapor and LED Shining Light (50W - 90W Range / 60W - 80W Recommended Range)
- V8 Baby T12 Orange Light 0.15 Ω Ohm Decuple Coil Head (Patented Decuple Coil) For Massive Vapor and LED Shining Light (50W - 90W Range / 60W - 80W Recommended Range)
For more info: click here.